The compact and versatile off-road transporter Aebi TP 410 is intended for use in agriculture, municipal services, and material transport. Its low own weight, high load capacity, and four-wheel drive enable efficient work on demanding terrains. It is powered by a four-cylinder Kubota diesel engine with a displacement of 3,3 liters, delivering 55,4 kW or 75 HP and meeting the Stage V emission standard.
The spacious panoramic cabin is mounted on rubber supports that reduce vibration transmission to the driver. Clear instruments and simply arranged control levers allow easy operation of the transmission, hydraulics, and PTO shaft, while the Hill-Holder system facilitates hill starts.
The reversible transmission with 16 forward gears and 16 reverse gears allows selection of the appropriate speed for transport and working with attachments. The vehicle has front-wheel steering and is available in versions with a maximum speed of 30 or 40 km/h.
Quick attachment changes enable year-round use. The TP 410 can be equipped with agricultural attachments, a tipper, a lift, mowing equipment, sweeping or surface washing equipment, and with a snow plow, spreader, or snow removal rotary broom it is also suitable for winter road and public area maintenance. Agricultural and municipal versions are available.
| Feature | Aebi TP 410 |
|---|---|
| Type of vehicle | Multipurpose off-road transporter |
| Versions | Agricultural and municipal |
| Engine brand | Kubota |
| Engine model | V3307-CR-T |
| Number of cylinders | 4 |
| Displacement | 3.331 cm³ |
| Engine power | 55,4 kW / 75 HP at 2.600 rpm |
| Maximum torque | 268 Nm at 1.300–1.700 rpm |
| Fuel | Diesel |
| Emission standard | Stage V |
| Transmission | Reversible, 16 forward gears and 16 reverse gears |
| Drive | Four-wheel drive |
| Maximum forward speed | 30 / 40 km/h, depending on configuration |
| Maximum reverse speed | Up to 35 km/h |
| Steering | Front wheels |
| Basic hydraulics | 30 l/min at 175 bar |
| Rear PTO shaft | 600 rpm |
| Fuel tank | 65 l |
| Brake system | Hydraulic, dual-circuit |
| Hill-start assist | Hill-Holder |
| Vehicle length | 4.567 / 4.967 mm |
| Wheelbase | 2.750 / 3.150 mm |
| Width depending on tires | 1.789–2.534 mm |
| Cabin width | 1.700 mm |
| Cab height | Approximately 2.210 mm |
| Curb weight without superstructure | 2.350 kg |
| Maximum permissible gross weight | 6.500 kg |
| Load capacity of the base vehicle before superstructure installation | Up to 4.150 kg |
Technical specifications originate from the supplier catalogue and may vary by configuration.
SEND AN INQUIRY