RM 120X HYBRID

Mobile hybrid impact crusher with the option of fully electric operation

The RM 120X Hybrid combines the mobility of a classic diesel machine with the advantages of electric drive. The crusher can operate independently with a diesel engine and generator, and with a suitable electrical connection, the diesel engine can be switched off and the machine can be powered 100 % electrically from the grid.

A special feature of the RUBBLE MASTER hybrid system is that in the hybrid version the diesel drive powers the generator, and the electrical energy then powers the machine drives – even the crusher rotor is driven by an electric motor instead of direct mechanical drive of the rotor by the diesel engine. This solution enables efficient use of energy and direct switching to grid power when available on the job site.

The hybrid system reduces fuel consumption by up to 25 % compared to conventional diesel-electric direct drive when operating with the diesel engine, and when connected to the electrical grid, no diesel fuel is needed to operate the crusher. Advantages of the electric drive also include lower emissions, less noise, and reduced maintenance on the drive system.

The RM 120X Hybrid is designed for demanding applications in processing concrete, asphalt, construction and demolition waste, and natural stone. Capacity is up to 350 t/h, and the crusher feed opening measures 1.160 × 820 mm.

Technical specifications

FeatureData
ModelRM 120X Hybrid
Crusher typemobile hybrid impact crusher
Capacityup to 350 t/h
Feed opening1.160 × 820 mm
Recommended input material sizeup to 660 mm
Crushing unit4-bar rotor
Rotor driveelectric motor
Drive systemhybrid – diesel engine/generator or electrical grid
Electric operation100 % electric from grid
Grid requirement*400 V / 50 Hz, protection up to 630 A
Hopper capacity4 m³
Extended hopper5 m³
Standard pre-screening1.560 × 910 mm
Active pre-screening (option)2.000 × 1.050 mm
Screening unit1.480 × 3.708 mm
Transport dimensions of standard RM 120X16.180 × 2.990 × 3.600 mm
Weight of standard RM 120X without options39.000 kg
Weight of standard RM 120X with screening unit45.600 kg

Technical specifications originate from the supplier catalogue and may vary by configuration.

SEND AN INQUIRY