Schmidt Arctic

Comprehensive offering for demanding winter maintenance

The Schmidt Arctic range includes eight families of snow plows and graders: HPD, HMX, SHJ, SHJ TR, AMS, AMS TR, APV, and RLP. They are designed for front-mounted, side-mounted, or undercarriage-mounted plowing as well as special tasks at airports.

1. Schmidt Arctic HPD – front snow plow for demanding road plowing

The Arctic HPD is a robust front snow plow for efficient snow removal from highways and other traffic roads. The polyethylene plow blade reduces friction during snow flow, while the high-strength steel frame ensures stability under heavy loads. The flexible iFlex scraper segment system follows surface irregularities, absorbs shocks, and reduces noise. An additional T2 scraper edge improves removal of wet snow and slush. The plow allows hydraulic rotation up to 42° in both directions.

2. Schmidt Arctic HMX – steel front snow plow

The Arctic HMX is a front snow plow with a steel plow blade for urban and regional roads. The blade shape enables efficient lifting and throwing of snow even at lower speeds. The iFlex system improves ground adaptation and reduces transmission of vibrations and noise during operation. For more thorough removal of wet snow and slush, an additional T2 scraper edge is available. Various attachments allow use on trucks, tractors, and wheel loaders.

3. Schmidt Arctic SHJ – side snow plow for trucks

The Arctic SHJ is a side snow plow designed to increase the total plowing width in combination with a front plow. It is primarily intended for maintenance of highways and other wide roads. The steel construction withstands heavy loads, and hydraulic adjustment allows adaptation of the working width during driving. The plow is also suitable for cutting and pushing roadside snow banks. Versions marked J use the flexible iFlex system for better ground following and reduced vibrations.

4. Schmidt Arctic SHJ TR – side snow plow for tractors

The Arctic SHJ TR is a tractor-mounted side snow plow for maintenance of local roads, private paths, and gravel surfaces. In combination with a front plow, it enables a total working width of up to 4,5 m. A special mounting allows the blade to tilt downward, which is useful for cutting snow banks and pushing snow away from the road edge. The plow is mounted on the tractor’s rear three-point hitch, and a shear bolt provides mechanical protection against overload.

5. Schmidt Arctic AMS – undercarriage grader for trucks

The Arctic AMS is a grader mounted under the chassis of a truck. In winter, it removes compacted snow and ice; in summer, it enables maintenance and profiling of gravel and forest roads. Adjustable attack angle and extension wings allow adaptation to different surfaces and tasks. The compact design also allows installation on vehicles with shorter wheelbases and use together with front and side snow plows.

6. Schmidt Arctic AMS TR – undercarriage grader for tractors

The Arctic AMS TR is a grader designed for mounting under a tractor, intended for year-round road maintenance. In winter, it removes compacted snow and ice; in summer, it profiles gravel and forest paths. Hydraulic rotation and telescopic extension wings allow adjustment of working width and material pushing direction. The iRoad 1 control system enables automatic lifting when reversing and return to the previous working position when resuming forward driving.

7. Schmidt Arctic APV – airport front snow plow

The Arctic APV is a snow plow designed for runways and other large airport surfaces. The patented polyurethane plow blade is resistant to wear, chemicals, and corrosion. The flexible construction follows the ground and enables efficient removal of snow, slush, and water. The compact lifting and turning mechanism reduces the overhang in front of the carrier vehicle, while the upper snow deflector reduces snow lift towards the cabin.

8. Schmidt Arctic RLP – plow with brushes for cleaning airport lights

The Arctic RLP is a dedicated attachment for snow removal around airport lights. It combines plow blades and rotary brushes: the front blades push away most of the snow, the brushes clean the light area, and the rear blades remove the remaining snow. Four support wheels guide the attachment over the surface. It is primarily intended for wheel loaders, but adaptation for larger tractors is also possible.

Technical specifications

ModelDescription of the version
HPD 3400Version with a scraper edge length of 3.400 mm for work on narrower road sections.
HPD 3700Version with a scraper edge length of 3.700 mm for daily winter road maintenance.
HPD 4000Version with a scraper edge length of 4.000 mm for greater coverage in a single pass.
HPD 4600The widest version of the family with a scraper edge length of 4.600 mm for extensive road surfaces.

Technical specifications

ModelDescription of the version
HMX 3400Smaller version of the family for road plowing with greater maneuverability.
HMX 3700Medium-sized version for urban and regional road surfaces.
HMX 4000Wider version for efficient cleaning of larger road surfaces.
HMX 4600The largest version of the family for wide surfaces and work in combination with a side plow.

Technical specifications

ModelDescription of the version
SHJ 210Side plow with a scraper edge length of 3.050 mm and a maximum working width of 2.270 mm.
SHJ 212Side plow with a scraper edge length of 3.660 mm and a maximum working width of 2.730 mm.
SHJ 214Side plow with a scraper edge length of 4.270 mm and a maximum working width of 3.180 mm.
SHJ 216 JVersion with iFlex system, scraper edge length of 4.880 mm and maximum working width of 3.510 mm.
SHJ 218 JThe largest version of the family with iFlex system, scraper edge length of 5.490 mm and maximum working width of 3.950 mm.

Technical specifications

ModelDescription of the version
SHJ 207 TRSide tractor plow for extending the plowed area and removing and shaping roadside snow banks.

Technical specifications

ModelDescription of the version
AMS 6Scraper with fixed right discharge direction and adjustable working width.
AMS 6 SAlternative version of the scraper with fixed rightward direction, featuring different working geometry and width range.
AMS 513Rotary scraper with the ability to turn left and right and two extension wings.
AMS 513iAdvanced version of the AMS 513 model with proportional control and more precise adjustment of working pressure and attack angle.

Technical specifications

ModelDescription of the version
AMS 513 TRRotary tractor scraper with two telescopic wings for snow and ice removal and summer maintenance of untreated roads.

Technical specifications

ModelDescription of the version
APV 5600Airport plow with a scraping edge length of 5.600 mm.
APV 7000Wider version with a scraping edge length of 7.000 mm for cleaning extensive airport surfaces.
APV 8400Largest version of the family with a scraping edge length of 8.400 mm for wide coverage in a single pass.

Technical specifications

Model or versionDescription
RLPSpecial airport attachment with plow blades and brushes for cleaning around lights.
Two height frame versionsAdaptation to different heights of airport lights; the manufacturer does not specify separate model designations for them.

Technical specifications originate from the supplier catalogue and may vary by configuration.

SEND AN INQUIRY