Schmidt HSM 70 - HSM 150

Agile towed sweeper for cleaning urban and municipal surfaces

The Schmidt MSH is a towed sweeper designed for cleaning streets, residential areas, parks and other public spaces. Due to its compact design and good maneuverability, it enables efficient work even in limited or confined spaces. The low noise level is especially suitable for use in urban environments, while the robust construction ensures a long service life. Available are the MSH 070 version with a collector volume of 0,7 m³ and the MSH 150 version with a collector volume of 1,5 m³.

The sweeping system consists of two side circular brushes that direct debris towards the center, and a rear roller brush that feeds material directly into the collector. Hydraulic lifting and lowering of the side brushes and adjustable roller brush protection allow adaptation to working conditions. Water nozzles reduce dust, and the water tank has a capacity of 200 or 500 liters depending on the version.

The steel collector is emptied by hydraulic tilting backwards, with a discharge height of 1.500 or 1.800 mm. Control of main functions is done from the towing vehicle cabin. Drive is provided by a power take-off shaft or powerful towing vehicle hydraulics; the narrow towing drawbar ensures a large steering angle and easy maneuvering.

Technical specifications

FeatureSchmidt MSH 070Schmidt MSH 150
Machine typeTowed sweeperTowed sweeper
Dirt collection systemMechanical, with brushesMechanical, with brushes
Dirt collector volume0,7 m³1,5 m³
Water tank capacity200 l500 l
Sweeping width1.600–1.900 mm1.900–2.200 mm
Number of side rotary brushes22
Diameter of side rotary brushes760 mm900 mm
Diameter of roller brush690 mm860 mm
Width of roller brush950 mm1.000 mm
Hopper discharge height1.500 mm1.800 mm
Collector emptyingHydraulic backward tiltHydraulic backward tilt
Water pump capacity15 l/min at 3,4 bar7,5 or 15 l/min at 3,4 bar
DrivePower take-off shaft or hydraulics of the towing vehiclePower take-off shaft or hydraulics of the towing vehicle
Hydraulic drive requirements30 l/min at 150 bar30 l/min at 160 bar
Maximum sweeping speed12 km/h12 km/h
Machine dimensions (L × W × H)3.220 × 1.900 × 1.560 mm4.580 × 2.200 × 1.690 mm
Permitted gross weight at 40 km/h1.500 kg3.000 kg
Empty machine weightApproximately 800 kgApproximately 1.300 kg

Technical specifications originate from the supplier catalogue and may vary by configuration.

SEND AN INQUIRY