The Schmidt Swingo 200+ is a compact vehicle for daily cleaning of streets, sidewalks, bike paths, parking lots, and industrial surfaces. Its narrow design and four-wheel steering enable efficient work even in narrow passages and on surfaces with limited turning space.
Available with two or three brushes, with stepless adjustment of rotation speed and ground pressure. The powerful suction system collects dirt into an aluminum container with a volume of 2 m³, and the discharge height of 1.400 mm allows easy unloading. The water reuse system reduces fresh water consumption, and the optional Koanda air circulation system further limits fine dust emissions.
The spacious air-conditioned cabin provides good visibility over the working area and comfort during extended operation. The hydrostatic drive enables smooth driving and easy speed adjustment to working conditions. Additional equipment for high-pressure cleaning, weed removal, and winter maintenance extends the machine's usability throughout the year.
| Technical data | Schmidt Swingo 200+ |
|---|---|
| Machine type | Compact self-propelled suction sweeping machine |
| Sweeping system | Version with 2 or 3 brushes |
| Collection container volume | 2 m³ |
| Sweeping width – 2 brushes | 1.400–2.900 mm |
| Sweeping width – 3 brushes | 1.800–2.200 mm; with third brush up to 2.600 mm |
| Brush diameter | 850 mm with 2 brushes / 800 mm with 3 brushes |
| Container discharge height | 1.400 mm |
| Container tilt angle | 102° |
| Fresh water tank capacity | 190 l |
| Total water system volume | 360 / 380 l, depending on version |
| Engine | FCA R754, four-cylinder diesel engine |
| Engine displacement | 2.970 cm³ |
| Power and emission standard | 55 kW (75 HP) – EuroMot V / 62 kW (84 HP) – Euro 6c |
| Sweeping speed | Up to 12 km/h; optionally up to 18 km/h |
| Transport speed | 25 / 40 / 45 / 50 km/h, depending on version |
| Length – version with 2 brushes | 4.580 mm with brushes |
| Length – version with 3 brushes | 5.090 mm with third brush |
| Width without brushes | 1.300 mm |
| Height without warning light | 1.990 mm |
| Wheelbase | 1.820 mm |
| Maximum permissible gross weight | 4.500 kg; optionally 5.000 kg |
| Empty weight of the base machine | Approximately 2.900 kg with 2 brushes / 3.000 kg with 3 brushes |
Technical specifications originate from the supplier catalogue and may vary by configuration.
SEND AN INQUIRY