Schmidt Stratos

Compact spreaders Stratos 06 and 08

Adjustable spreaders for efficient and precise winter maintenance

Schmidt Stratos is an extensive family of professional spreaders for winter maintenance of sidewalks, bicycle paths, parking lots, city streets, regional roads, and highways. Various hopper sizes and mounting options allow adaptation to compact municipal vehicles, multi-purpose carriers, Unimog vehicles, and trucks.

The modular design allows the choice of belt or auger conveyor system, salt wetting equipment, various spreading discs, and drive solutions. Precise dosing and adjustable spreading pattern ensure even distribution of material and economical use of spreading agents.

The range includes classic low-profile spreaders Stratos F, double-compartment versions Stratos D, trailed spreaders, and combined devices Stratos Combi Soliq. Depending on the selected equipment, EvolutionLine control, temperature-dependent dosing ThermoLogic, spreading guidance Route Assistant, and operation monitoring IntelliOPS are available.

The compact models are intended for smaller trucks and municipal vehicles for maintenance of parking lots, pedestrian paths, bicycle lanes, and narrow city streets. They allow the choice of belt or auger conveyor and the use of wetted salt.

Drive is possible via vehicle hydraulics, Rotopower system, or separate engine depending on configuration.

Compact versions of Stratos F feature a low hopper and two conveyor augers. They are designed for narrow carrier vehicles where a low center of gravity and good rear visibility are important. Suitable for city centers and demanding mountain roads.

The compact Stratos D series combines a low design with two separate compartments in a 2 : 1 ratio. Independently controlled conveyor augers allow separate or simultaneous spreading of different materials and adjustment of their mixing ratio.

Models Stratos 17, 20, 25, and 30 are intended for winter maintenance of urban, local, and regional roads. The choice of belt or auger conveyor and various brine tank sizes enable adaptation to the vehicle and the length of the work route.

The spreading width ranges from 2 to 10 m or 3 to 12 m, depending on the selected spreading system. Hydraulic drive from the vehicle, Rotopower, or a separate diesel engine are available.

The medium Stratos F series utilizes the width of the carrier vehicle and, with two conveyor augers, enables a low hopper design. It is suitable for users who need a larger material capacity while maintaining a low center of gravity.

The drive is provided by the vehicle hydraulics, and the spreading width ranges from 2 to 10 m or 3 to 12 m, depending on the equipment.

Two-compartment versions allow transport of two different spreading materials and their independent dosing. They are suitable for routes where varying requirements for salt and grip-enhancing materials alternate.

The spreading width ranges from 2 to 10 m or 3 to 12 m, depending on the spreading disc. The drive is provided by the carrier vehicle hydraulics.

The large series is intended for longer routes, regional roads, and highways. Hoppers with volumes from 4 to 12 m³ allow a larger supply of spreading material, and various mounting systems enable adaptation to trucks and other suitable carriers.

Spreading systems allow working widths of 2–10 m, 3–12 m, or 4–14 m. Mounting options include RoRo system, stabilizing legs, hook lift system, and fixed mounting, depending on the model.

Models Stratos F 40 and F 44 are especially suitable for mounting on appropriate Unimog vehicle versions. The wide and low hopper with two conveyor augers enables efficient use of space and good visibility when working on demanding routes.

Large Stratos D spreaders allow separate or simultaneous spreading of two materials from a hopper divided in a 1 : 2 ratio. They are intended for mounting on Unimog or trucks and for demanding winter service tasks.

Two independently controlled augers allow adjustment of the spreading material ratio. The drive is hydraulic, with an optional separate diesel engine available.

Towed models enable the use of the spreader on a trailer. They are equipped with a belt conveyor system and brine tanks for spreading with wetted salt.

Stratos Combi Soliq combines spreading of dry materials, wetted salt, and spraying with brine. Variants RSP and WSP allow adaptation to local roads or wider carriageways. Flex versions use flexible internal tanks to increase brine capacity.

The RSP system enables application via a spreading disc, while WSP combines the disc with a nozzle spraying system that allows spraying up to approximately 12 m width. The device is powered by vehicle hydraulics and controlled via the EvolutionLine ES system. The empty weight depends on the configuration and is not specified in the reviewed technical data.

Technical specifications

ModelHopper capacityBrine tankMaterial transportSpreading width
Stratos 060,6 m³350 lBelt or auger2–6 m
Stratos 080,8 m³350 lBelt or auger2–6 m

Technical specifications

ModelHopper capacityMaterial transportSpreading widthDrive
Stratos F 060,6 m³Two augers2–6 mVehicle hydraulics
Stratos F 111,1 m³Two augers2–6 mVehicle hydraulics
Stratos F 131,3 m³Two augers2–6 mVehicle hydraulics
Stratos F 17 – compact version1,7 m³Two augers2–6 mVehicle hydraulics

Technical specifications

FeatureStratos D – compact series
Hopper capacity1,1–1,7 m³
Hopper designTwo-compartment, ratio 2 : 1
Material transportTwo independently controlled augers
Spreading width2–6 m
Diameter of spreading disc350 mm
DriveHydraulics of the carrier vehicle
ControlEvolutionLine ES
InstallationSupport legs or fixed installation
Empty weightNot specified for individual compact versions

Technical specifications

ModelHopper capacityBrine tanksMaterial transportApproximate empty weight
Stratos 171,7 m³850 lBelt or auger620 kg
Stratos 202,0 m³850 / 1.090 lBelt or auger630 kg
Stratos 252,5 m³1.090 / 1.270 lBelt or auger665 kg
Stratos 303,0 m³1.270 lBelt or auger700 kg

Technical specifications

ModelHopper capacityBrine tanksMaterial transportApproximate empty weight
Stratos F 14 / F 151,4 / 1,5 m³850 lTwo augers695 kg
Stratos F 17 – medium version1,7 m³850 lTwo augers720 kg
Stratos F 202,0 m³850 / 1.090 lTwo augers735 kg
Stratos F 252,5 m³1.090 / 1.270 lTwo augers785 kg
Stratos F 303,0 m³1.270 lTwo augers840 kg

Technical specifications

ModelTotal hopper volumeBrine tanksMaterial transportApproximate empty weight
Stratos D 14 / D 151,4 / 1,5 m³850 lTwo independent augers715 kg
Stratos D 171,7 m³850 lTwo independent augers743 kg
Stratos D 202,0 m³850 / 1.090 lTwo independent augers760 kg
Stratos D 252,5 m³1.090 / 1.270 lTwo independent augers815 kg
Stratos D 303,0 m³1.270 lTwo independent augers880 kg

Technical specifications

ModelHopper capacityBrine tanksMaterial transportApproximate empty weight
Stratos 404,0 m³1.850 / 2.400 lBelt or auger1.015 kg
Stratos 505,0 m³1.850 / 2.400 lBelt or auger1.040 kg
Stratos 606,0 m³2.400 / 3.000 lBelt or auger1.125 kg
Stratos 707,0 m³2.400 / 3.000 lBelt or auger1.375 kg
Stratos 808,0 m³2.400 / 3.000 lBelt or auger1.420 kg
Stratos 909,0 m³2.400 / 3.000 lBelt or auger1.455 kg
Stratos 10010,0 m³3.000 lTrack1.635 kg
Stratos 12012,0 m³3.000 lTrack1.700 kg

Technical specifications

ModelHopper capacityBrine tanksSpreading widthApproximate empty weight
Stratos F 404,0 m³1.760 l2–10 m or 3–12 m1.009 kg
Stratos F 444,4 m³1.760 l2–10 m or 3–12 m1.009 kg

Technical specifications

ModelTotal hopper volumeBrine tanksSpreading widthApproximate empty weight
Stratos D 404,0 m³2.200 l2–10 m or 3–12 m1.223 kg
Stratos D 505,0 m³2.200 l2–10 m or 3–12 m1.264 kg
Stratos D 606,0 m³2.200 l2–10 m or 3–12 m1.311 kg

Technical specifications

ModelHopper capacityBrine tanksMaterial transportApproximate empty weight
Stratos A40K4,0 m³1.850 lTrack2.415 kg
Stratos A50K5,0 m³1.850 lTrack2.440 kg

Technical specifications

VersionHopper capacityMain feature
Stratos CS RSP / WSP 40K4,0 m³Combined spreading and spraying
Stratos CS RSP / WSP 50K5,0 m³Combined spreading and spraying
Stratos CS RSP / WSP 50K Flex High5,0 m³Flex version with larger internal tank capacity
Stratos CS RSP / WSP 50K Flex Low5,0 m³Low Flex version
Stratos CS RSP / WSP 60K6,0 m³Larger stock of solid spreading material
Stratos CS RSP / WSP 70K7,0 m³For longer working routes

Technical specifications originate from the supplier catalogue and may vary by configuration.

SEND AN INQUIRY