Robust design, precise dosing and flexible installation options
Schmidt Syntos is a series of spreaders for winter maintenance of roads, parking lots, bicycle paths, and other traffic surfaces. The hopper made of durable polyethylene is corrosion-resistant, and the built-in brine tank contributes to a low center of gravity and even emptying.
The series includes four body-mounted models with volumes from 0,8 to 1,7 m³ and three trailed versions. The body-mounted spreaders are suitable for installation on pickups, flatbed trucks, and narrow municipal vehicles, while the trailed versions allow use with tractors and other suitable towing vehicles.
The body-mounted models are available with belt or auger conveyor systems, while the trailed models use a conveyor belt. The FS 30 salt pre-wetting system automatically adjusts the amount of dry material when adding brine. The stainless steel spreading disc ensures even distribution, and speed-dependent control allows maintaining the set spreading quantity.
General technical characteristics
| Model | Version | Hopper capacity | Brine tank volume | Spreading material transport |
|---|---|---|---|---|
| Syntos 08 | Body-mounted | 0,8 m³ | 400 / 520 l | Conveyor belt or auger |
| Syntos 11 | Body-mounted | 1,1 m³ | 400 / 520 / 625 l | Conveyor belt or auger |
| Syntos 15 | Body-mounted | 1,5 m³ | 520 / 625 l | Conveyor belt or auger |
| Syntos 17 | Body-mounted | 1,7 m³ | 850 l | Conveyor belt or auger |
| Syntos A 08 | Trailed | 0,8 m³ | 520 l | Conveyor belt |
| Syntos A 11 | Trailed | 1,1 m³ | 625 l | Conveyor belt |
| Syntos A 17 | Trailed | 1,7 m³ | 850 l | Conveyor belt |
| Feature | Data |
|---|---|
| Hopper material | Polyethylene, corrosion resistant |
| Diameter of spreading disc | 350 mm |
| Standard spreading width | 2–6 m |
| Spreading width with Premium system with five mixing zones | 1–6 m |
| Drive of mounted models | Vehicle hydraulics, Rotopower or own engine |
| Drive of trailed models | Integrated drive or hydraulics of the towing vehicle |
| Steering | EC, EP or ES, depending on equipment |
| Pre-wetting system | FS 30 |
| Discharge of mounted models | Support legs |
Technical specifications originate from the supplier catalogue and may vary by configuration.
SEND AN INQUIRY