Schmidt Tellefsdal

Schmidt Tellefsdal – snow plows for road and municipal winter maintenance

Robust construction and adaptable designs for various plowing tasks

The Schmidt Tellefsdal range includes six families of snow plows: D70, K70, V90, VPL, U-LS, and U-H2. Different sizes and adjustable shapes allow cleaning of roads, sidewalks, bike paths, parking lots, and industrial surfaces.

1. Schmidt Tellefsdal D70 – diagonal snow plow

The Tellefsdal D70 is a diagonal snow plow for demanding road winter maintenance. The higher right side effectively lifts and diverts snow, while the lower left side improves visibility from the cabin and facilitates work near safety barriers. The attack angle of 70° enables thorough snow removal, and the segmented safety system cushions impacts when hitting obstacles. The integrated snow deflector reduces snow lift towards the windshield.

2. Schmidt Tellefsdal K70 – universal front snow plow

The Tellefsdal K70 is a versatile front snow plow for urban and open road surfaces. It combines features of a diagonal plow and allows efficient snow pushing in both directions. Hydraulic rotation up to 35° left and right enables adjustment of the discharge direction during operation. The attack angle of 70° improves compacted snow clearing, and safety segments allow passing over obstacles. An additional scraper edge is also available for more thorough cleaning.

3. Schmidt Tellefsdal V90 – robust snow plow with variable geometry

The Tellefsdal V90 is a powerful two-wing snow plow for demanding snow conditions. The left and right wings adjust independently, allowing wedge shape, scoop position, or one-sided snow pushing. The robust construction is designed for use with powerful carrier vehicles. The spring safety system of the scraper edges reduces loads when hitting obstacles, and various mounts allow installation on tractors, loaders, and other suitable vehicles.

4. Schmidt Tellefsdal VPL – universal variable snow plow

The Tellefsdal VPL is a flexible snow plow for roads, sidewalks, bike paths, and other municipal surfaces. Two hydraulically adjustable wings allow wedge shape, scoop position, and one-sided plowing. Due to a wide range of sizes, it is suitable for compact municipal vehicles, tractors, and wheel loaders. The automatic safety system cushions impacts against obstacles, and various scraper edges enable adaptation to surface types and snow conditions.

5. Schmidt Tellefsdal U-LS – snow plow with adjustable side wings

Tellefsdal U-LS is a snow plow for clearing parking lots, intersections, and other larger areas, as well as collecting snow in confined spaces. It consists of a central blade and two hydraulically adjustable side wings. The wings can be rotated forward up to 90°, forming a U shape for efficient pushing and collecting of snow. The safety system with individual spring-loaded segments allows the cutting edges to retract upon impact with obstacles. It is suitable for tractors and loaders with the appropriate hitch.

6. Schmidt Tellefsdal U-H2 – heavy-duty snow plow for large volumes of snow

Tellefsdal U-H2 is a particularly robust snow plow for industrial areas, large parking lots, and airport surfaces. The three-part construction allows use in a U shape or for one-sided snow pushing. The side wings hydraulically rotate forward up to 90°, enabling the collection and pushing of larger amounts of snow over longer distances. The entire plow rotates up to 35° in both directions. It is primarily intended for wheel loaders, and the hydraulic system includes cylinder overload protection.

Technical specifications

ModelDescription of the version
D70-3400Diagonal plow with a plowing width of 2.623 mm at an angle of 40° for road winter maintenance.
D70-3700Larger version with a plowing width of 2.852 mm at an angle of 40° for greater coverage in a single pass.
D70-3400SSize variant 3400 with S designation, listed as a separate version in the manufacturer's offer.
D70-3700SSize variant 3700 with S designation for demanding road plowing.

Technical specifications

ModelDescription of the version
K70-3100Smallest listed version of the family with a total width of 3.285 mm.
K70-3400Medium version with a total width of 3.580 mm for versatile road plowing.
K70-3700Larger version with a total width of 3.886 mm for wider traffic areas.
K70-3400SVersion S with a plowing width of 2.920 mm at an angle of 35°.
K70-3700SLarger version S with a plowing width of 3.170 mm at an angle of 35°.

Technical specifications

ModelDescription of the version
V90-2800Smallest version of the family with a scraper edge length of 2.890 mm.
V90-3200Medium version with a scraper edge length of 3.289 mm for various plowing tasks.
V90-3700Largest specified version with a scraper edge length of 3.700 mm for cleaning larger areas.

Technical specifications

ModelDescription of the version
VPL 15Compact version with a scraper edge length of 1.584 mm for narrow areas.
VPL 18Version with a scraper edge length of 1.886 mm for sidewalks, paths, and smaller municipal areas.
VPL 21Version with a scraper edge length of 2.184 mm for wider paths and local areas.
VPL 24Medium-sized version with a scraper edge length of 2.486 mm.
VPL 27Larger version with a scraper edge length of 2.786 mm for road and parking surfaces.
VPL 30Largest version of the family with a scraper edge length of 3.082 mm.

Technical specifications

ModelDescription of the version
U-LS 3700 (6-3-3)More compact version with a scraper edge length of 3.660 mm for snow collection and plowing of larger areas.
U-LS 4300 (6-4-4)Version with a scraper edge length of 4.270 mm and wider side wings as in model 3700.
U-LS 4600 (7-4-4)Larger version with a scraper edge length of 4.575 mm and a wider central section.
U-LS 4900 (8-4-4)Largest specified version with a scraper edge length of 4.880 mm for extensive surfaces.

Technical specifications

ModelDescription of the version
U-4600 H2Heavy plow with a scraper edge length of 4.600 mm for large parking and industrial surfaces.
U-5200 H2Medium version with a scraper edge length of 5.210 mm for greater coverage during plowing.
U-5800 H2The largest specified version with a scraper edge length of 5.820 mm for extensive surfaces and large amounts of snow.

Technical specifications originate from the supplier catalogue and may vary by configuration.

SEND AN INQUIRY